Our Blog


SALE on Postal Tabber – Wafer Sealers

All For Mailers is running a SALE on the following Postal Tabber – Wafer Sealers! 2 of the units are Demonstration units with low maintenance counts!   RENA T-950 INLINE TABBER LABELER STAMP AFFIXER – DEMONSTRATOR – $8,995.00 You will not find a more robust table top tabber with more features! Need to run it inline […]

Read Full Post

How do I adjust and clean the Accufast KT Tab Sensor?

UPDATED 12/19/2018 If you experience tabbing problems on the Accufast KT, tune the sensor for clear tabs – translucent tabs Also know as a KT Sensor Reset: WARNING DO NOT PLACE FINGERS OR TOOLS BETWEENOR NEAR MOVING PARTS. 1) Turn the POWER SWITCH off.2) Remove any tabs and debris from the peel point area through the […]

Read Full Post

Where can I download a Operators Manual for my Accufast KT Tabber and XL Labeler

? I just purchased a used Accufast XL labeler and KT Tabber. But they came without manuals. Were can I get manuals for them? Answer:  SuppliesForMailers.com For the Accufast XL Operators Instruction Manual go here.  http://suppliesformailers.com/xl-operators-manual-instruction.aspx For the Accufast KT Operators Instruction Manual go here.   http://suppliesformailers.com/accufast-kt-operators-manual.aspx While you are there.. Need tabs – wafer seals made to […]

Read Full Post

1.5 inch tabs for Accufast KT2 Tabber

Do you offer a KT2 upgrade kit to allow it to apply 1.5 inch tabs?  And where can I purchase the tabs? No upgrade kit is available for the Accufast KT2 double tabber to allow it to apply 1.5″ tabs.  This is due to the number of parts that would need to be replaced.  By […]

Read Full Post

Upgrade you Accufast KT to apply 1.5″ wafer seals!

Below is Announcement from Accufast explaining the KT Factory Upgrade offer to retrofit you current KT to allow it to do 1.5″ tabs turn it into a KT1.5 We’re announcing our first step in response to the changes in the USPS tabbing regulations.  We have added the 1.5 inch tab capacity to our KT tabber. […]

Read Full Post

Accufast rebuilt KT tabber – $1800.00

We have a rebuilt Accufast KT tabber available. It is in very good condition having been recently refurbished. It comes with a 90 day parts and labor warranty along with all accessories. It will handle KT clear, white, translucent – translucent and colored tabs at speeds of 8-10,000 per hour ( realistic ). The KT […]

Read Full Post