The Ultimate Tabbing and Stamping Solution – Rena T-650 Multi-Side Tabber
Some mailers need just a single tab and a stamp, others need a tab on the front and one on the back – but it doesn’t matter what kind of mail you’ve got, you can put every tab in its place with the Rena T-650 Multi-Side Tabber. It’ll tab up to three times, side-to-side or top-to-side, without missing a beat and even switches between tabbing configurations in seconds.
Apply Three Tabs in One Pass!
Tabs help keep your mailers closed and give them a final, professional touch – but if you need multiple tabs with your old equipment, you have to send your mailers through again and again. Stop wasting time with mailroom equipment that can’t quite get the job done! Instead, take a look at the Rena T-650, one of the most innovative tabbers on the market.
Apply tabs, stamps or small labels in a single pass through the T-650, using paper, clear or translucent tabs. You’ll get your mail-out ready quicker with a machine that can apply tabs at a rate of up to 25,000 pieces per hour. The Rena T-650 easily integrates with other mailroom equipment for a total mail solution, or can stand alone with a friction feeder to tab mail once you’ve sent it through other parts of your process.
Rena T-650 Multi-Side Tabber
The Rena T-650 Multi-Side Tabber is a multi-function tabber that can do it all. Features include:
Tab accuracy within 1/16 inch.
Accepts materials up to 11 inches wide,15 inches long and 1/4 inch thick.
Tabs to multiple sides of the same piece in one pass.
Nine inch diameter reel capacity with a three inch core.
Feeder control and emergency stop switch integrate with other Rena systems and feeders.
Single tab up to 25,000 pieces per hour, double tab 15,000 pieces per hour, triple tab up to 10,000 pieces per hour.
Custom tabbing, stamping and labeling in just one pass can be at your fingertips with a Rena T-650 Multi-Side Tabber.
Clear, Translucent, or Paper
Single Tab: Up to 25,000 pieces per hour
Double Tab: Up to 15,000 pieces per hour
Triple Tab: Up to 10,000 pieces per hour (11” min. piece length)
Minimum (W x L): 5″ x 3.5″
Maximum (W x L): 11” x 15”
Up to 1/4”
In-line design works with various input devices
MIN: 3/4” x 3/4”
MAX: 1.5” x 1.5”
Adjusts for density in tab/wafer seals
9” Diameter (3” core)
Number Of Tabs
1, 2, or 3 Tabs
Start/Stop Control for RENA Systems Feeders
Life and Job Count and Production rate and speed
Optional Friction Feeder (EASYFeed 120)
Can apply up to three tabs/stamps
Interlocks on all adjustments
Emergency Stop Switch
30 million addresses total or 500,000 per month over a 5-year life cycle.